So yesterday I was able to remove the end cap of the VFC M4 pistol that I purchased from Evike. I had a cqb stock that I got from ebairsoft for 12.00 with shipping. I had to cut the screw down so that it would fit on the back of the stock. I then placed it on the back of the baby M4 and this is what it looks like. I will be adding a front RIS, I decided to go with the Diablo rail system since it comes with an inner barrel. I was going to go with a Daniel Defense but it did not come with an outer barrel. I was not going to spend another 30 dollars on an outer barrel. Wish me luck!!! I will finish with the internals once the externals are complete.
Once I am done I will be adding a Mosfet with Active Breaking. This should be fun as I should be done with this project in about three weeks from day.
This is the final project, I am officially finished with my VFC M4 Baby convert. I have to say it was fun and I had little to no problems with VFC. I have to say aside from the piston VFC makes excellent products. The Craftsmanship is above all! I had several G&P guns and VFC still takes this one. VFC gearbox’s are excellent and with little to effort I was able to get a high fps and high rate of fire. I also made my gun look nice take a look at the video and I hope you enjoy.
M4 pistol
So I decided to purchase a VFC baby M4 pistol because of the external and internal upgrade potential.
External – The VFC looks great from many reviews that I have read. The attention to detail is what catches my eye
Internals – according to many reviews on youtube I have found that many airsofters agree that the internals are great. slim gearbox reinforced, 8mm bushings that is flush with the inside of the gearbox, piston that looks very similar to the azmiuth piston (airsoft-gi would like to claim this piston as there own), shots 330 – 360 fps, the only parts I will be buying for this gun is a front ris setup. I’m going to go with Daniel Defense 7 inch since my noveske will sit flush inside… This is just my style : ). I will be running a 11.1v 20c 1800mah lipo. I decided to go with Blue lipo from Blue Lipo Battery its only going to cost me 10 -11 dollars. The great thing about this battery aside from the price, the internal resistance of the lipo battery is very low. This means that you get a 25c rated battery you reall get a 25c rated battery. Most batteries claim to have the correct C rating but actually run lower. Make sure you get your deans connectors and a cheap soldering iron from Radio shack. Once I am done I am going to add my butt stock that I got from ebairsoft for 10 dollars this is the same G and P quality rubberized material cqb model with rear door. The G and P model is nice but you have to remove the stock to change the battery and this can be a chore. I should have something that looks like this….
Airsoft Research 